Biaxial tensile plastic geogrid
Product Description
Product Specification：
TGSG1515、 TGSG2020、TGSG2525、TGSG3030、TGSG3535、TGSG4040、TGSG4545、TGSG5050、TGSG6060 etc., the width is 2~6meters.
For over 30 years, biaxial geogrids have been utilized in pavement construction and soil stabilization projects throughout the US and worldwide. It is our innovative geogrid that is made from extruded polypropylene which provides superior stiffness, aperture stability and interlock capabilities for structural reinforcement of paved and unpaved roads.
Lateral spreading of base course aggregate or subbase material is the most critical and common failure in pavement structures. Using StrataBase stabilizes aggregate soil through confinement and introduces tensile strength, and effectively reduces this spreading. It also allows for an increasing bearing capacity and load support capacity, resulting in improved structural performance and pavement life. Additionally, aggregate thickness can be reduced by 50% with the use of StrataBase.
Biaxial geogrids is ideal for the following uses:
Base reinforcement for flexible pavements
Subgrade and foundation improvement: cost effective alternate to undercutting and backfilling
Parking areas for commercial and industrial facilities
Haul road stabilization
Airport runways
Construction platforms and embankments over soft soils
Caps for sludge ponds and landfills
Product Features：
1. Increase the bearing capacity of the road (ground) foundation and prolong the service life of the road (ground) foundation;
2. Prevent the road (ground) from collapsing or cracking, and keep the ground beautiful and tidy;
3. Strengthen the soil slope to prevent soil erosion; support the stable greening environment of the slope planting geonet pad;
4. It can replace metal mesh and be used for plastic net protecting top-plane in coal mining.
Product Parameters
GB／T17689--2008 “Geosynthetics- Plastic Geogrid” (Two way geogrid)
|
Item |
TGSG15-15 |
TGSG20-20 |
TGSG25-25 |
TGSG30-30 |
7GSG35-35 |
TGSG40-40 |
TGSG45-45 |
TGSG50-50 |
TGSG55-55 |
|
Vertical Tensile Strength ≥(kN/m) |
15 |
20 |
25 |
30 |
35 |
40 |
45 |
50 |
55 |
|
Horizontal Tensile Strength≥(kN/m) |
15 |
20 |
25 |
30 |
35 |
40 |
45 |
50 |
55 |
|
Vertical Nominal elongation ≤(％) |
15 |
||||||||
|
Horizontal Nominal elongation≤(%) |
13 |
||||||||
|
Vertical Tensile strength with 2% Srain ≥(kN/m) |
5 |
7 |
9 |
10.5 |
12 |
14 |
16 |
17.5 |
20 |
|
Horizontal Tensile strength with 2% Srain ≥(kMm) |
5 |
7 |
9 |
10.5 |
12 |
14 |
16 |
17.5 |
20 |
|
Vertical Tensile strength with 5% Srain ≥(kMm) |
7 |
14 |
17 |
21 |
24 |
28 |
32 |
35 |
40 |
|
Horizontal Tensile strength with 5% Srain≥(kN/m) |
7 |
14 |
17 |
21 |
24 |
28 |
32 |
35 |
40 |
|
Width (m) |
1-6 |
|
|||||||
