China Wholesale PP Fabric Geotextiles - filament spunbond and needlepunched nonwoven geotextiles – Taixi
China Wholesale PP Fabric Geotextiles - filament spunbond and needlepunched nonwoven geotextiles – Taixi Detail:
Product Description
Filament geotextiles: Filament geotextiles are polyester filament needle-punched non-woven geotextiles, which do not contain chemical additives and are not heat-treated. They are environmentally friendly building materials. It can replace traditional engineering materials and construction methods, make construction safer, help environmental protection, and solve basic problems in engineering construction more economically, effectively and lastingly.
Filament geotextile has good mechanical function, good water permeability, anti-corrosion, anti-aging, and has the functions of isolation, anti-filtration, drainage, protection, stabilization, reinforcement, etc. Damage, creep is small, and the original function can still be maintained under long-term load.
Filament geotextile characteristics:
Strength – Under the same gram weight specification, the tensile strength in all directions is higher than other needle punched non-woven fabrics.
Anti-ultraviolet light – has a very high anti-ultraviolet ability.
Extremely high temperature resistance – high temperature resistance up to 230 ℃, the structure remains intact and the original physical properties are still maintained under high temperature.
Permeability and Plane Drainage – The geotextile is thick and needle punched and has good plane drainage and vertical water permeability, which can be maintained for many years.
Creep resistance – The creep resistance of geotextiles is better than other geotextiles, so the long-term effect is good. It is resistant to the erosion of common chemicals in soil and corrosion of gasoline, diesel, etc.
Extensibility – geotextiles have good elongation under certain stress, making them adaptable to uneven and irregular base surfaces.
Technical characteristics of filament geotextiles: The thicker geotextiles can ensure the three-dimensional porosity of the geotextiles, which is conducive to the realization of excellent hydraulic properties.
The burst strength of geotextile has great advantages, especially suitable for retaining wall and embankment reinforcement. The indexes of geotextiles all exceed the national standards and are excellent geotechnical reinforcement materials.
This is a geotextile with three-dimensional pores produced from PET or PP by melt spinning, air-laid, and needle-punched consolidation processes.
Product Introduction
Product Specification
The gram weight is 100g/㎡～800g/㎡; the width is 4～6.4 meters, and the length is according to customer needs.
Product Features
High mechanical index, good creep performance; strong corrosion resistance, aging resistance, excellent heat resistance, and fine hydraulic performance.
Application Scenarios
Mainly used for reinforcement, filtration, isolation and drainage of water conservancy, hydropower, environmental protection, highways, railways, dams, coastal beaches, metallurgical mines and other projects.
Product Description
|
Item |
Indicator |
||||||||||
|
1 |
Mass per unit area (g/m2) |
100 |
150 |
200 |
300 |
400 |
500 |
600 |
800 |
1000 |
|
|
2 |
Breaking strength,KN/m≥ |
4.5 |
7.5 |
10 |
15 |
20 |
25 |
30 |
40 |
50 |
|
|
3 |
Vertical and horizontal breaking strength,KN/m≥ |
45 |
7.5 |
10.0 |
15.0 |
20.0 |
25.0 |
30.0 |
40.0 |
50.0 |
|
|
4 |
Breaking elongation,% |
40~80 |
|||||||||
|
5 |
CBR bursting strength,KN≥ |
0.8 |
1.6 |
1.9 |
2.9 |
3.9 |
5.3 |
6.4 |
7.9 |
8.5 |
|
|
6 |
Vertical and horizontal tear strength,KN/m |
0.14 |
0.21 |
0.28 |
0.42 |
0.56 |
0.70 |
0.82 |
1.10 |
1.25 |
|
|
7 |
Equivalent pore size O90 （O95） /mm |
0.05~0.20 |
|||||||||
|
8 |
Vertical permeability coefficient, cm/s |
K×（10-1~10-3）where K=1.0~9.9 |
|||||||||
|
9 |
Thickness,mm≥ |
0.8 |
1.2 |
1.6 |
2.2 |
2.8 |
3.4 |
4.2 |
5.5 |
6.8 |
|
|
10 |
Width deviation,% |
-0.5 |
|||||||||
|
11 |
The quality deviation per unit area, % |
-5 |
|||||||||
Product detail pictures:
Related Product Guide:
We not only will try our best to offer excellent services to every customer, but also are ready to receive any suggestion offered by our customers for China Wholesale PP Fabric Geotextiles - filament spunbond and needlepunched nonwoven geotextiles – Taixi , The product will supply to all over the world, such as: Italy, USA, Serbia, We integrate design, manufacture and export together with more than 100 skillful workers, strict quality controlling system and experienced technology.We keep long term business relationships with wholesaler and distributors form more than 50 countries, such as USA, UK, Canada, Europe and Africa etc.
By Eleanore from Miami - 2018.09.21 11:01
This is a very professional wholesaler, we always come to their company for procurement, good quality and cheap.
By lucia from France - 2017.08.21 14:13
-
Factory Cheap Different Geotextile - three dim...
-
China Supplier Geotextile Cost - geonet drain ...
-
2021 Good Quality Non Woven Geotextile Fleece M...
-
OEM/ODM China Plastic Road Geogrid - Biaxial t...
-
New Delivery For Geotech Style Fabric - geonet...
-
Factory Best Selling Non Woven Geotextile 300g ...